Made a lot of progress this afternoon on the Saab 105. The kit from MBS models is excellent everything slots together with such precision. The instructions are good and take you through each step in detail. I’ve gotten to a point now where I need to make sure the motors are balanced before they are […]
Next step label all parts according to the part list. Then carefully cut out and sand the front parts of the fuselage.
The build can begin! MBS Models Saab 105 / sk60. First step secure the build stand in two pieces of aluminium angle.
[yt]http://www.youtube.com/watch?v=gwMvE_gWtkA[/yt] Guillow’s Cessna 150 309 ailerons using Spektrum micro servos and AR6400
1.5mm carbon fibre bulkhead – light weight and very strong. I’ve used epoxy to glue this on. Tail plane: I’ve decided to try and build the tail light weight, hopefully it will be strong enough 🙂
Thanks 🙂 My battery will be as far forwards as possible and I will move the servos if I have to but I think batter will need to go in lengthways. Aileron wise did you use what’s on the plan or make them bigger? Here’s some pics of the motor:
Project RC conversion on a Guillows 403 Spitfire